Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 169)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 169
FactoryTalk View ME Configuration
Chapter 5
The CNC Work Cell Drill_CNC parameter #2 is assigned to the faceplate Add-On Instruction tag
named Drill_CNC_FP found in the R02_Monitor routine of the P04_Drill_CNC program.
a. Double-click the parameter file to open it.
b. Enter your application controller’s shortcut name in all
parameters.
c. Enter the associated faceplate Add-On Instruction tag name
of the device or module for this faceplate parameter.
d. Close parameter file and acknowledge the Save Changes
dialog box.
9. Repeat step 8 for each of your device or module faceplate parameters.
TIP Less editing is required when assigning HMI alarm tags if you name your controller shortcut [CLX]. Refer to
Chapter 6 for configuring your controller shortcuts in RSLinx Enterprise communication setup.