Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 115)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 115
GuardLogix Configuration
Chapter 4
The Configure Tag References dialog box opens.
9. Replace Final Tag Names with the associated UDT_AppStatus tag names or UDT_ModuleStatus tag
names for your specific application.
For the CNC Work Cell application example, both _ApplicationName UDT_AppStatus tags were
assigned to Gantry and Machining UDT_AppStatus tags, and _ModuleName01…04
UDT_ModuleStatus tags were assigned to Drill_CNC, Machine_CNC, Gantry_X_Drive, and
Gantry_Y_Drive UDT_ModuleStatus tags.
IMPORTANT If your machine requires more than two applications and/or more than ten modules (devices), then you also need
additional instructions in the status rungs. Refer to step 13 on page 119 for more information.