Apple Aperture 2 - Manual (Page 512)

512 Part IV Distribution and Backup
Creating a Slideshow
You can easily set up your slideshow by selecting the images you want and then
choosing a slideshow preset.
To create and play a slideshow:
1 Select a set of images by doing one of the following:
 Select a project or album in the Projects inspector.
 Select individual images or image stacks in the Browser.
2 Choose File > Slideshow (or press Shift-S).
The Run Slideshow dialog appears.
3 Choose a preset from the Slideshow Preset pop-up menu:
 Dissolve: Displays each image for 3 seconds, with a 2-second cross fade.
 Fade through Black: Displays each image on a black background for 3 seconds, with a
2-second cross fade.
 Manual: You control this slideshow’s progression with the Right Arrow and Left
Arrow keys.
 Slow Dissolve: Displays each image for 5.1 seconds, with a 5-second cross fade.
 4-Up Slow: Successively displays four images one at a time, showing each image for
3 seconds and then transitioning with a 2-second cross fade. The first image is
replaced with the fifth, and so on.
 4-Up Fast: Successively displays four images one at a time, showing each image for
1 second. The first image is replaced with the fifth, and so on.
4 If you want file status badges to appear over the images in the slideshow, select the
“Show file status badges” checkbox.
5 Click Start.
If either no image or a single image is selected, the slideshow displays all images in the
current album or project.