Apple Aperture 2 User Manual
Page 407
Chapter 15
Making Image Adjustments
407
III
4
In the Crop area of the Adjustments inspector or the Adjustments pane of the Inspector
HUD, click the X value slider’s left or right arrow, or double-click the number and enter
a new number, to set the horizontal position of the bottom-left corner of the crop.
The X value is measured in pixels, and as the value increases, the crop moves to the right.
5
Specify the vertical position of the bottom-left corner of the crop using the Y value slider.
The Y value is measured in pixels, and as the value increases, the crop moves up.
6
Specify the width of the crop using the Width value slider.
The width is measured in pixels, and the measurement starts at the bottom-left corner,
increasing from left to right.
7
Specify the height of the crop using the Height value slider.
The height is measured in pixels, and the measurement starts at the bottom-left corner,
increasing from bottom to top.
The X and Y value sliders
control the position of
the bottom-left corner
of the crop on the
original image.
Use the Width and
Height value sliders to
adjust the size of the
area within the crop.