GW Instek APS-1102A User Manual - Manual (Page 85)

4 ADVANCED OPERATION EXAMPLE
APS-1102A 4-13
c) Select measurement display
Select one form among RMS, AVG, or PEAK as the measured current and voltage values to be
displayed.
To select a measurement display, select “MEASURE” in the MISC menu .

Operation steps
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor
2. Press the
EN TER
key to display the MISC menu.
Press the or key to move the cursor to “MEASURE”.
ENTER CANCEL
3. Press the
EN TER
key to display the selection box.
ENTER CANCEL
Selection box