GW Instek APS-1102A User Manual - Manual (Page 181)

5 MENUS
APS-1102A 5-47
5.6.6 Output on/off setting at power-on
The APS-1102A can be set to automatically turn output on at power-on.
However, when restarting after a system lock, the APS-1102A will start with output off regardless of this
setting.

Operation steps
1. Press the or key to move the cursor to “INIT OUT”.
ENTER CANCEL
Cursor
2. Press the
EN TER
key to display the selection box.
ENTER CANCEL
Selection box
3. Press the or key to move the cursor to “ON” (when off) or to “OFF” (when on).
ENTER CANCEL
4. Press the
EN TER
key to complete the setting. Press the
CA NCE L
key to cancel the setting.