GW Instek APS-1102A User Manual - Manual (Page 177)

5 MENUS
APS-1102A 5-43
5.6.2 Beep sound
When the beep sound is on, a beep sounds when an incorrect operation is made, a key is pressed, or a
modify operation is made. When a protection function-related error occurs, an alarm sound will be output
regardless of the beep sound setting.

Operation steps
1. Press the or key to move the cursor to “BEEP”.
ENTER CANCEL
Cursor
2. Press the
EN TER
key to display the selection box.
ENTER CANCEL
Selection box
3. Press the or key to move the cursor to the other beep setting (i.e., to OFF when on or
to ON when off).
ENTER CANCEL
4. Press the
EN TER
key to complete the setting. Press the
CA NCE L
key to cancel the setting.