GW Instek APS-1102A User Manual - Manual (Page 171)

5 MENUS
APS-1102A 5-37
5.5.8 Output on/off
The APS-1102A output on/off setting can be entered using the
OUTPUT
key on the front panel, but it can also
be controlled via the MISC menu.
See “3.4.8 Output on/off ”.

Operation steps
1. Press the or key to move the cursor to “OUTPUT”.
ENTER CANCEL
2. Press the
EN TER
key to display the selection box.
ENTER CANCEL
3. Press the key to move the cursor to “ON”.
ENTER CANCEL
4. Press the
EN TER
key to turn output on, at which time the output on/off LED goes on.
OUTPUT OUTPUT
Output off Output on
Output on/off LED is on.