GW Instek APS-1102A User Manual - Manual (Page 230)

APS-1102A User Manual
APS-1102A 6-46
 
IDN?
This returns the model name, etc. The response message includes the “manufacturer, model name,
serial number, and firmware version”.
Syntax:

IDN?
Parameters: None
Query example:

IDN?
Response format:
Response example:
“GW Instek, APS-1102A, 000001, Ver1.00”
 
OPC
When all operations
※
have been completed, this sets the standard event register OPC bit (BIT0).

OPC? returns 1 when all operations have been completed. However, the standard event register
OPC bit is not cleared to zero when

OPC? is executed.
Syntax:

OPC
Parameters: None
Command example:

OPC
Query example:

OPC?
Response format:
Response example: 1
 
RCL
This recalls status information stored to memory by

SAV. The selection range for the recall
memory is 1 to 30. However, recall is disabled when output is on. ([1, “Invalid with output on”]
error occurs.)
Syntax:

RCL
Parameters: 1 to 30
Command example:

RCL 1
Response format: None
Response example: None