GW Instek APS-1102A User Manual - Manual (Page 260)

APS-1102A User Manual
APS-1102A 8-2
8.1 Introduction
This chapter describes the following items.

Caution points and storage methods for long periods of non-use

Caution points for transport and when repackaging for transport
See “2.4 Simple Operation Checks”, for description of simple operation checks.
If the product does not pass the operation checks, request calibration and/or repair to GW Instek or our
agent.
8.2 Routine Maintenance
Be sure to install the APS-1102A in a location that meets the installation requirements.
S ee “2.2 Installation Environment”, for description of the installation requirements.
a) When panel or case is dirty
Wipe clean with a soft cloth. For stubborn dirt, use a cloth that has been dipped in neutral detergent and
then firmly wrung out.
Do not use a cloth treated with a volatile solvent, such as paint thinner or benzene, or a chemically
treated cloth, which may cause discoloration or peeling of paint.