GW Instek APS-1102A User Manual - Manual (Page 223)

6 REMOTE INTERFACE
APS-1102A 6-39

STATus:WARNing:ENABle
This sets the warning event enable register. The setting ranges from 0 to 29947.
Syntax: STATus:WARNing:ENABle
Parameters: 0 to 29947
Command example: STAT:WARN:ENAB 1
Query example: STAT:WARN:ENAB?
Response format:
Response example: 1

STATus:WARNing[:EVENt]?
This returns the warning event register value. The response ranges from 0 to 29947.
Syntax: STATus:WARNing[:EVENt]?
Parameters: None
Query example: STAT:WARN?
Response format:
Response example: 0

STATus:WARNing:NTRansition
STATus:WARNing:PTRansition
This sets the warning transition filter (WRTF). The setting ranges from 0 to 29947.

When the NTR filter is set to 1, WRER is set to 1 when WRCR changes from 1 to 0.

When the PTR filter is set to 1, WRER is set to 1 when WRCR changes from 0 to 1.

When the NTR and PTR filters are set to 1, WRER is set to 1 when WRCR changes.

When the NTR and PTR filters are set to 0, changes in WRCR are not propagated to WRER.
Syntax: STATus:WARNing:NTRansition
STATus:WARNing:PTRansition
Parameters: 0 to 29947
Command example: STAT:WARN:NTR 16384
STAT:WARN:PTR 0
Query example: STAT:WARN:NTR?
STAT:WARN:PTR?
Response format:
Response example: 16384
0