GW Instek APS-1102A User Manual - Manual (Page 29)

2 PREPARATIONS BEFORE USE
APS-1102A 2-5
 Do not install the APS-1102A in the following locations:

Location with flammable gas

An explosion may occur. Never install and use this product in such a location.

Outdoors, or location exposed to direct sunlight or near a fire or heat source

The full performance of this product may not be obtained, or failure may occur.

Location with corrosive gas, moisture, or high humidity

This product may become corroded or fail.

Location near an electromagnetic field source, high-voltage device, or power line

This product may malfunction.

Location exposed to excessive vibration

This product may malfunction or fail.

Location with excessive dust

In particular, electrically conductive dust may cause failure of this product.