GW Instek APS-1102A User Manual - Manual (Page 262)

APS-1102A User Manual
APS-1102A 8-4
8.3 Storage, Repackaging, and Transportation
Store the APS-1102A in a location that meets the installation requirements.
S ee “2.2 Installation Environment”, for description of installation requirements.
a) Storage when unused for a long time

Remove the power cord from the outlet and the product.

Store the product on a shelf or rack where it will be protected from falling objects and dust.
If it may be covered with dust, put the cover, such as cloth and polyethylene sheet, on it.

The minimum storage environment requirements are a temperature range of

10°C to +50°C, with
5% to 95% RH, but it is also important to avoid locations subject to abrupt temperature changes
and/or exposure to direct sunlight. If possible, choose a storage environment that has a steady
ambient temperature.
See “9.16 Ambient Temperature Range, Ambient Humidity Range, Etc.”, for
detailed storage conditions.
b) Repackaging and transportation
Note the following caution points when repacking the main unit for transport, repair, or for some other
reason.

Wrap the main unit in a polyethylene bag or sheet.

Use a cardboard box that is strong enough to support the main unit weight and large enough for its
size.

Pack with shock-absorbent material on all six sides of the main unit.

Inform the transport company that this product is a precision equipment.

Be sure to include the instruction manual at transportation.