GW Instek APS-1102A User Manual - Manual (Page 157)

5 MENUS
APS-1102A 5-23
5.4 MEASURE Screen
The MEASURE screen in the measured value window displays measured values for items selected as
measurement display items (some of which depend on the output mode).
The measured values for output voltage and output current are displayed as values set via “MEASURE”
in the MISC menu.
Table5-18. Display Items in MEASURE Screen
Item Unit
Select
Measurement
Display
Reference
Voltage RMS value Vrms RMS
“5.4.1 Output voltage
measurement ”
DC voltage value V AVG
Maximum
voltage value
Vpk PEAK
Minimum voltage value Vpk PEAK
Current RMS value Arms RMS
“5.4.2 Output current
measurement ”
DC current value A AVG
Maximum
current value
Apk PEAK
Minimum
current value
Apk PEAK
Current peak value hold Apk PEAK
Effective power W
Always
displayed
“5.4.3 Output power
measurement ” Apparent power VA
Always
displayed
Reactive power var
Always
displayed
Synchronization
frequency
Hz
During external
synchronization
mode only
“5.4.7 External synchronization
frequency measurement ”
Load power factor None
Always
displayed
“5.4.4 Load power factor
measurement ”
Load crest factor None
Always
displayed
“5.4.5 Load crest factor
measurement ”