GW Instek APS-1102A User Manual - Manual (Page 125)

4 ADVANCED OPERATION EXAMPLE
APS-1102A 4-53
4. Press the
EN TER
key to select the mode to be set.
ENTER CANCEL
5. Press the or key to move the cursor to the icon, then press the
EN TER
key to
display the selection box.
ENTER CANCEL Selection box
6. Press the or key to move the cursor to “EXT”, then press the
EN TER
key.

This sets the external sync signal source to external sync signal “EXT”.
ENTER CANCEL
---------- Notes -----------------------------------------------------------------------------------------------------
 The frequency range for external synchronization is 40 Hz to 5 0 0 H z. Only use settings
within this range.
-------------------------------------------------------------------------------------------------------------------------