GW Instek APS-1102A User Manual - Manual (Page 132)

APS-1102A User Manual
APS-1102A 4-60
4. Press the or key to move the cursor to the output voltage range to be set, then press the
EN TER
key.

This sets the selected output voltage range.
ENTER CANCEL
5. Press the or key to move the cursor to the icon, then press the
EN TER
key.

The modification box is displayed.
ENTER CANCEL
6. Press the and keys to move the cursor to the column to be changed, turn the MODIFY dial
and set a numerical value.

The set value is reflected immediately in the output.
Increase Decrease
7. After entering all of the values, press the
CA NCE L
or
EN TER
key to close the modification box.