GW Instek APS-1102A User Manual - Manual (Page 170)

APS-1102A User Manual
APS-1102A 5-36
5.5.6 Selection of measurement display (MEASURE)
Select the measurement values to be displayed from the RMS value (RMS), average DC (AVG), peak
value (PEAK), and harmonic current values (HC1 to HC4).
When harmonic current value is selected, the RMS value, average DC, and peak value are not measured.
When measurement of the RMS value, average DC, or peak value has been set, harmonic current is not
measured.
S
ee “3.4.9 Using measurement functions”, for description of measurement display selection.
S ee “4.3 Measurement of Harmonic Current” and
“5.4.6 Output harmonic current measurement”, for description of harmonic current
measurement.
5.5.7 Reset of peak current hold value
This resets the peak current hold value.
A reset sets the peak current hold value to 0 Apk, and then holds the new peak value.
S ee “4.2.4 Reset the peak current hold value”, for description of resetting peak current hold
value.