GW Instek APS-1102A User Manual - Manual (Page 60)

APS-1102A User Manual
APS-1102A 3-26
3.4.6 Setting output frequency
The AC output frequency can be set in the following range.
Table3-11. Output Frequency Setting
Setting Range Resolution Setting Accuracy
1.0 Hz to 550.0 Hz 0.1 Hz

0.01% (1.0 Hz to 550.0 Hz, 23

5°C)
See “3.4.7 Using limiter functions”, when using an output frequency setting range limit.
------- Notes --------------------------------------------------------------------------------------------------------
 If the frequency is set 40 Hz or lower in AC-INT mode, there is a possibility that the output
waveform will be distorted and DC offset will be output.
----------------------------------------------------------------------------------

Operation steps
To set the output frequency, set in the SET menu.
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor
2. Press the
EN TER
key to display the modification box.
ENTER CANCEL
Modification box