GW Instek APS-1102A User Manual - Manual (Page 180)

APS-1102A User Manual
APS-1102A 5-46
5.6.5 Time unit setting
The unit used to indicate the time parameter can be specified.
Select either “s” (second) or “ms” (millisecond) for this time unit.

Operation steps
1. Press the or key to move the cursor to “TIME UNIT”.
ENTER CANCEL
Cursor
2. Press the
EN TER
key to display the selection box.
ENTER CANCEL
Selection box
3. Press the or key to move the cursor to the displayed unit.
ENTER CANCEL
4. Press the
EN TER
key to complete the setting. Press the
CA NCE L
key to cancel the setting.