GW Instek APS-1102A User Manual - Manual (Page 59)

3 PANEL AND BASIC OPERATIONS
APS-1102A 3-25

Operation steps
To set the output voltage, set in the SET menu.
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor
2. Press the
EN TER
key to display the modification box.
ENTER CANCEL
Modification box
3. Press the and keys to move the cursor to the digit to be changed, turn the MODIFY dial
and set a numerical value. The set value will be reflected in output immediately.
Increase Decrease
4. Press the
CA NCE L
or
EN TER
key to close the modification box.