GW Instek APS-1102A User Manual - Manual (Page 102)

APS-1102A User Manual
APS-1102A 4-30
3. Press the
EN TER
key to display the SEQUENCE screen.
ENTER CANCEL
4. Press the or key to select the operation to be performed.

To control sequence operations: select “CONTROL…”.
( See “4.4.4 Control of sequence operations”.)
Note This cannot be selected when output is off.

To program a sequence: Select “PROGRAM”.
( See “4.4.3 Programming sequences”.)

To control sequence memory: Select “MEMORY…”.
( See “4.4.5 Clear sequence memory”.)
ENTER CANCEL
5. Press the
EN TER
key to display the desired screen .
ENTER CANCEL