GW Instek APS-1102A User Manual - Manual (Page 176)

APS-1102A User Manual
APS-1102A 5-42
5.6.1 Keylock
The APS-1102A is equipped with a function that prevents key input errors during operation.
When “keylock” is on, all keys become inactive except for the keylock off key. Although it is possible to
switch among menus when keylock is on, basically no changes can be made except for turning keylock
off. However, output can still be turned off via the OUTPUT key as an emergency response measure.

Operation steps
1. Press the or key to move the cursor to “KEYLOCK”.
ENTER CANCEL
Cursor
2. Press the
EN TER
key to display the selection box.
ENTER CANCEL
Selection box
3. Press the or key to move the cursor to the other keylock setting (i.e., to OFF when on
or to ON when off).
ENTER CANCEL
4. Press the
EN TER
key to complete the setting. Press the
CA NCE L
key to cancel the setting.