GW Instek APS-1102A User Manual - Manual (Page 63)

3 PANEL AND BASIC OPERATIONS
APS-1102A 3-29

Operation steps
Select the icon in the SET menu corresponding to the desired setting, then set a numerical value.

Peak current limiter (positive):

Peak current limiter (negative):

RMS current limiter:
1. Press the or key to move the cursor to the ,or or icon.
ENTER CANCEL Cursor
2. Press the
EN TER
key to display the modification box.
ENTER CANCEL
Modification box
3. Press the and keys to move the cursor to the digit to be changed, turn the MODIFY dial
and set a numerical value. The set value will be reflected in output immediately.
Increase Decrease
4. Press the
CA NCE L
or
EN TER
key to close the modification box.