GW Instek APS-1102A User Manual - Manual (Page 263)

8 MAINTENANCE
APS-1102A 8-5
8.4 Checking the Version Number
The APS-1102A firmware version is displayed in the bottom right of the screen for a few seconds after
power-on.
At other times, the version information can be checked via the control panel system information screen, as
described below.

Operation steps
Select the SYSTEM menu from the MISC menu , then select “INFORMATION”.
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor
2. Press the
EN TER
key to display the MISC menu.
Press the key to move the cursor to “SYSTEM” .
ENTER CANCEL
3. Press the
EN TER
key to display the SYSTEM screen .
ENTER CANCEL