GW Instek APS-1102A User Manual - Manual (Page 140)

APS-1102A User Manual
APS-1102A 5-6
5.1.2 Warnings and error messages
When a warning or error occurs, an error message is displayed in a message box or message display
window.
S ee “7 TROUBLESHOOTING”, for further description of error messages.
5.1.3 Sequence display
The APS-1102A is equipped with a function that indicates the progress of the sequence being executed.
The information listed in Table5-2 is displayed in the status window.
Table5-2. Sequence Display
Message Description Remark
SEQUENCE:
RUNNING / STEP ***
Sequence is being executed *** indicates step number being executed.
SEQUENCE:
HOLDING / STEP ***.
Sequence is being held *** indicates step number being held.
SEQUENCE: FINISH Sequence has been completed
This message is closed automatically after
two seconds.