HEIDENHAIN TNC 407 (280 580) ISO Programming - Manual (Page 63)

TNC 426/TNC 425/TNC 415 B/TNC 407 2 - 2
2 Manual Operation and Setup
e.g.
X
e.g.
Y
together
I
2.1 Moving the Machine Axes
Traversing with the machine axis direction buttons
Traversing with the machine axis direction buttons can vary depending on the individual machine tool. Your
machine manual provides more information on this function.
MANUAL OPERATION
The axis moves as long as the corresponding axis direction button is
held down.
You can move more than one axis at once in this way.
For continuous movement
MANUAL OPERATION
Press and hold the machine axis direction button, then press the
machine START button.
The axis continues to move after you release the keys.
To stop the axis, press the machine STOP button.
You can move more than one axis at once in this way.