HEIDENHAIN TNC 407 (280 580) ISO Programming User Manual
Page 303
11-6
11
Tables, Overviews and Diagrams
TNC 426/TNC 425/TNC 415 B/TNC 407
Radius measurement with the TT 120 touch probe: Probing direction
MP6505
Positive probing direction in the angle reference axis (0° axis):
0
Positive probing direction in the +90° axis:
1
Negative probing direction in the angle reference axis (0° axis):
2
Negative probing direction in the +90° axis:
3
Probing feed rate for second measurement with TT 120, stylus shape, corrections in TOOL.T
MP6507
Calculate feed rate for second measurement with TT 120, with constant tolerance:
+0
Calculate feed rate for second measurement with TT 120, with variable tolerance:
+1
Constant feed rate for second measurement with TT 120:
+2
TT 120 with cylindrical stylus:
+0
TT 120 with cubic stylus:
+64
Automatically enter the results in TOOL.T:
+0
Do not correct TOOL.T:
+128
Maximum permissible error of measurement for measuring rotating tools with the TT 120
Required for calculating the probing feed rate in connection with MP6570.
MP6510
0.001 to 0.999 [mm] (recommended input value: 0.005 mm)
Feed rate for probing a tool with the TT 120 during standstill of the tool
MP6520
10 to 3 000 [mm/min]
Radius measurement with the TT 120: Distance from lower edge of tool to upper edge of stylus
The value entered for MP6530 is added to the value defined in the tool table for TT:L-OFFS.
MP6530
0.0001 to 9 999.9999 [mm]
Rapid traverse for the TT 120 touch probe in the probe cycle
MP6550
10 to 10 000 [mm/min]
Measuring rotating tools: Permissible rotational speed at the circumference of the milling tool
MP6570
40.000 to 120.0000 [m/min]
Stylus center REF coordinates of the TT 120 touch probe
MP6580.0
X axis:
–99 999.9999 to 99 999.9999 [mm]
MP6580.1
Y axis:
–99 999.9999 to 99 999.9999 [mm]
MP6580.2
Z axis:
–99 999.9999 to 99 999.9999 [mm]
3D touch probes and digitizing