HEIDENHAIN TNC 407 (280 580) ISO Programming User Manual
Page 52
TNC 426/TNC 425/TNC 415 B/TNC 407
1 - 3 4
1
Introduction
With the WINDOW soft key you can change the screen layout to show the
contents of two different directories, one in each half of the screen. Use
this setting for copying files between directories and for importing or
exporting files. Press the WINDOW soft key again if you wish to return to
the other layout.
File name
File display:
Files stored in the
active directory
File information
File display:
Files stored in the
active directory
To select the directory:
➤ Press the leftward or rightward arrow key to switch to the window in
which you wish to select a new directory.
➤ Press the PATH soft key to switch to the path display. The TNC then
shows the drives (active drive is depicted in a different color) and the
active directory (also depicted in a different color).
➤ If you wish to change drives, press the upward arrow key to move the
highlight to the new drive.
➤ Once the highlight is on the desired drive, confirm your selection with
ENT. The TNC automatically returns to the file display. The window then
shows the files stored in the uppermost directory of the selected drive.
➤ If you wish to select a subdirectory, press the PATH soft key to return to
the path display.
➤ Press the downward arrow key to move the highlight to the desired
directory.
➤ Once the highlight is on the desired directory, confirm your selection
with ENT. The TNC then automatically switches back to the file window
containing the files stored in the selected directory.
Active path
File information
Active path