HEIDENHAIN TNC 407 (280 580) ISO Programming - Manual (Page 42)

TNC 426/TNC 425/TNC 415 B/TNC 407 1 - 2 4
1 Introduction
or
or
or
To rotate the 3D view:
Shift the soft-key row.
Rotate the workpiece in 27° steps about the vertical axis.
The current angular attitude of the display is
indicated at the lower left of the graphic.
To switch the frame overlay display on/off:
Show or omit the frame overlay of the workpiece blank form.
1.4 Graphics and Status Displays
Fig. 1.26: Rotated 3D view