HEIDENHAIN TNC 407 (280 580) ISO Programming User Manual
Page 109
TNC 426/TNC 425/TNC 415 B/TNC 407
4 - 1 2
4
Programming
Overview: Information in tool tables
Abbreviation Input
Dialog
T
Number by which the tool is called in the program
–
NAME
Name by which the tool is called in the program
TOOL NAME ?
L
Value for tool length compensation
TOOL LENGTH L ?
R
Tool radius R
TOOL RADIUS ?
R2
Tool radius R2 for toroid cutters
(only for 3D radius compensation or graphical representation
of a machining operation with spherical or toroid cutters)
TOOL RADIUS 2 ?
DL
Delta value for tool length
TOOL LENGTH OVERSIZE ?
DR
Delta value for tool radius R
TOOL RADIUS OVERSIZE ?
DR2
Delta value for tool radius R2
TOOL RADIUS OVERSIZE 2 ?
LCUTS
Tooth length of the tool: required for Cycle 22
(TNC 426 only)
TOOTH LENGTH IN TOOL AXIS ?
ANGLE
Maximum plunge angle of the tool for reciprocating
plunge-cut
(TNC 426 only)
MAXIMUM PLUNGE ANGLE ?
TL
Tool Lock
TOOL INHIBITED
YES=ENT/NO=NOENT
R T
Number of a replacement tool, if available (see also
TIME2
ALTERNATE TOOL ?
TIME1
Maximum tool life in minutes:
The meaning of this information can vary depending
on the individual machine tool. Your machine manual
provides more information on TIME 1.
MAXIMUM TOOL LIFE ?
TIME2
Maximum tool life in minutes during TOOL CALL:
If the current tool life exceeds this value, the TNC
changes the tool during the next TOOL CALL (see
also CUR.TIME).
MAXIMUM TOOL LIFE FOR TOOL
CALL ?
CUR.TIME
Time in minutes that the tool has been in use:
The TNC automatically counts the current tool life. A
starting value can be entered for used tools.
CURRENT TOOL LIFE ?
DOC
Comment on tool (up to 16 characters)
TOOL DESCRIPTION ?
PLC
Information on this tool that is to be sent to the PLC
PLC STATUS ?