HEIDENHAIN TNC 407 (280 580) ISO Programming - Manual (Page 312)

11-15
11 Tables, Overviews and Diagrams
TNC 426/TNC 425/TNC 415 B/TNC 407
Electronic handwheel
11.1 General User Parameters
Handwheel type
MP7640 Machine without handwheel: 0
HR 330 with additional keys—the handwheel keys for traverse direction and
rapid traverse are evaluated by the NC:
1
HR 130 without additional keys: 2
HR 330 with additional keys—the handwheel keys for traverse direction and
rapid traverse are evaluated by the PLC:
3
HR 332 with twelve additional keys: 4
Multi-axis handwheel with additional keys: 5
HR 410 with auxiliary functions: 6
Entry of interpolation factor
MP7641 Interpolation factor is entered on the keyboard: 0
Interpolation factor is set by the PLC: 1
Machine parameters that can be set for the handwheel by the machine tool builder
MP 7645.0 0 to 255
MP 7645.1 0 to 255
MP 7645.2 0 to 255
MP 7645.3 0 to 255
MP 7645.4 0 to 255
MP 7645.5 0 to 255
MP 7645.6 0 to 255
MP 7645.7 0 to 255