HEIDENHAIN TNC 407 (280 580) ISO Programming User Manual
Page 308
11-11
11
Tables, Overviews and Diagrams
TNC 426/TNC 425/TNC 415 B/TNC 407
TNC displays, TNC editor
Display step for the IV axis
MP7290.3
0.1 mm:
0
0.05 mm:
1
0.01 mm:
2
0.005 mm:
3
0.001 mm:
4
0.0005 mm:
5
0.0001 mm:
6
Display step for the V axis
MP7290.4
0.1 mm:
0
0.05 mm:
1
0.01 mm:
2
0.005 mm:
3
0.001 mm:
4
0.0005 mm:
5
0.0001 mm:
6
Inhibit datum setting
MP7295
Do not inhibit datum setting:
+0
Inhibit datum setting in the X axis:
+1
Inhibit datum setting in the Y axis:
+2
Inhibit datum setting in the Z axis:
+4
Inhibit datum setting in the IV axis:
+8
Inhibit datum setting in the V axis:
+16
Inhibit datum setting with the orange axis keys
MP7296
Do not inhibit datum setting:
0
Inhibit datum setting with the orange axis keys:
1
Reset status display, Q parameters and tool data
MP7300
Reset them all when a program is selected:
0
Reset them all when a program is selected and with M02, M30, N99999:
1
Reset only status display and tool data when a program is selected:
2
Reset only status display and tool data when a program is selected
and with M02, M30, N99999:
3
Reset status display and Q parameters when a program is selected:
4
Reset status display and Q parameters when a program is selected
and with M02, M30, N99999:
5
Reset status display when a program is selected:
6
Reset status display when a program is selected
and with M02, M30, N99999:
7
Graphic display mode
MP7310
Projection in 3 planes according to ISO 6433, projection method 1:
+0
Projection in 3 planes according to ISO 6433, projection method 2:
+1
Do not rotate coordinate system for graphic display:
+0
Rotate coordinate system for graphic display by 90°:
+2
Display new BLK FORM in G54 DATUM SHIFT referenced to previous datum:
+0
Display new BLK FORM in G54 DATUM SHIFT referenced to new datum:
+4
Do not show cursor position during projection in 3 planes mode:
+0
Show cursor position during projection in 3 planes mode:
+8