HEIDENHAIN TNC 407 (280 580) ISO Programming - Manual (Page 40)

TNC 426/TNC 425/TNC 415 B/TNC 407 1 - 2 2
1 Introduction
Fig. 1.23: Shifting sectional planes
Fig. 1.22: TNC graphics, projection in three planes
or
or
1.4 Graphics and Status Displays
or
Projection in 3 planes
Similar to a workpiece drawing, the part is
displayed with a plan view and two sectional
planes. A symbol to the lower left indicates
whether the display is in first angle or third angle
projection according to ISO 6433 (selected with
MP 7310).
Details can be isolated in this display mode for
magnification (see page 1–25).
Shifting planes
The sectional planes can be shifted as desired.
The positions of the sectional planes are visible
during shifting.
Shift the soft-key row.
Shift the vertical sectional plane to the right or left.
Shift the horizontal sectional plane upwards or downwards.