5 machine-specific user parameters -6, 6 showing the workpiece in the working space -6, 5 machine-specific user parameters – HEIDENHAIN TNC 407 (280 580) ISO Programming User Manual

Page 293: 6 showing the workpiece in the working space

Text mode
Original mode

1 0 - 6

MOD Functions

TNC 426/TNC 425/TNC 415 B/TNC 407

10.5 Machine-Specific User Parameters

The machine tool builder can assign functions to up to 16 user parameters.
For more detailed information on user parameters, refer to your machine
operating manual.

10.6 Showing the Workpiece in the Working Space

The DATUM SET soft key enables you to graphically check the position of
the workpiece blank in the machine's working space and to activate work
space monitoring in the TEST RUN mode of operation.

Available traversing
range/datums,
referenced to the
displayed workpiece
blank

Coordinate system

Size of the blank

Working space

Workpiece blank
with orthographic
projections