HEIDENHAIN TNC 407 (280 580) ISO Programming - Manual (Page 179)

TNC 426/TNC 425/TNC 415 B/TNC 407 5 - 4 6
5 Programming Tool Movements
5.7 Positioning with Manual Data Input: System File $MDI
END
0 0 G
Example application
Correcting workpiece misalignment on machines with rotary tables.
Make a basic rotation with the 3D touch probe, write down the
ROTATION ANGLE, then cancel the basic rotation again.
• Change the operating mode
POSITIONING WITH MANL. DATA INPUT
Open the system file $MDI.
• Program the rotation
• Select the rotary table axis.
• Enter the ROTATION ANGLE you wrote down.
Confirm your entry.
The rotary axis corrects the misalignment.
I