HEIDENHAIN TNC 407 (280 580) ISO Programming - Manual (Page 50)

TNC 426/TNC 425/TNC 415 B/TNC 407 1 - 3 2
1 Introduction
1.5 File Management on the TNC 426
To select the drive:
➤ Press the leftward arrow key to move the highlight bar to the active
directory (left in the screen).
➤ Press the upward arrow key to move the highlight bar to the desired
drive.
➤ Once the highlight bar is on desired drive, confirm your selection with
ENT.
To create a new directory:
➤ Select the drive.
➤ Press the downward arrow key to move the highlight to the directory
under which you wish to open a new directory.
➤ Enter the name of the new directory (up to eight characters) and confirm
with ENT.
➤ Answer the TNC dialog question with the YES soft key if you wish to
create a new directory, or abort with NO.
To select the directory:
➤ Select the drive.
➤ Press the downward arrow key to move the highlight to the desired
directory. In the right screen window, the TNC automatically displays
the files stored in this directory.
or
➤ Press the leftward arrow key to move the highlight to the active directory
(left in the screen).
➤ Enter the path directly with the ASCII keyboard and confirm with ENT.