HEIDENHAIN TNC 407 (280 580) ISO Programming User Manual
Page 62
TNC 426/TNC 425/TNC 415 B/TNC 407
1 - 4 4
1
Introduction
File Management on the TNC 425, TNC 415 B and TNC 407
To format a floppy disk in the FE 401B:
➤ Press the EXT key. The TNC displays the files stored in the TNC
memory in the left screen half, and the files stored on the FE 401 in the
right screen half.
➤ Move the highlight to the right screen half.
➤ Press the WINDOW soft key to select one-window mode.
➤ Shift the soft-key row.
➤ Press the FMT soft key.
➤ Enter a name for the diskette and start formatting with ENT.
➤ Close the file manager with END.
To convert and transfer files:
➤ Press the EXT key.
➤ Move the highlight in the left screen half to the file you wish to convert
and transfer.
➤ Shift the soft-key row.
➤ Press the CONVERT soft key
➤ Press the CONVERT –> .A soft key, for example, to convert the file into
an ASCII text file and store it on the FE 401.
➤ Type the new file name into the highlight in the screen headline and
confirm with ENT.
➤ Close the file manager with END.