Delta Electronics Human Machine Interface DOP-A Series - Manual (Page 156)

Chapter 3 Element Function|ScrEdit Software User Manual
Revision Apr. 30th, 2007, 2007PDD23000002 3-19
3.3 Meter Element
Fig. 3.3.1 Meter element options
Table 3.3.1 Property Description of Meter Element
Property Description of Meter Element
The user can set meter appearance in the property table, such as the style, the color (including border color,
background color, stitch color, scale color) and the scale region number, etc. Also, the max. & min. value
and high & low limit can be defined in Detail Setup dialog box. It can be used to calculate the specified
address and measure if it exceeds the limit or not. The user can also use various colors to show clearly and
this is convenience for the user to recognize.
Read Address The address can be internal memory or the controller address. (Please refer to Table
3.2.2 Property Description of General Buttons.)
Text / Text Size
Font / Text Color The user can set the text, text size, font and text color that provided by Windows®
to determine the text display on the element. (Please refer to Table 3.2.2 Property
Description of General Buttons.)
Border Color It is used to set the border color of meter element.
Background Color It is used to set the background color of meter element.
Standard Raised Sunken Style
Data
Length There are 16bits Word and 32bits
Double Word two options.
There are following data format
provided:
Word/Double Word
Data
Format
1. BCD
2. Signed
BCD
3. Signed Decimal
4. Unsigned Decimal
Minimum
Value
Detail Setup
Maximum
Value
It is used to set the display minimum
and maximum value.