Table 142: show ipv6 traffic - display description – Microsens MS453490M Management Guide User Manual
Page 938

C
HAPTER
41
| IP Interface Commands
IPv6 Interface
– 938 –
ICMPv6 Statistics:
ICMPv6 received
input
errors
destination unreachable messages
packet too big messages
time exceeded messages
parameter problem message
echo request messages
echo reply messages
redirect messages
group membership query messages
group membership response messages
group membership reduction messages
router solicit messages
router advertisement messages
neighbor solicit messages
neighbor advertisement messages
redirect messages
ICMPv6 sent
15 output
destination unreachable messages
packet too big messages
time exceeded messages
parameter problem message
echo reply messages
7 router solicit messages
3 neighbor solicit messages
neighbor advertisement messages
redirect messages
group membership response messages
group membership reduction messages
UDP Statistics:
input
no port errors
other errors
output
Console#
Table 142: show ipv6 traffic - display description
Field
Description
IPv6 Statistics
IPv6 recived
total received
The total number of input datagrams received by the interface,
including those received in error.
header errors
The number of input datagrams discarded due to errors in their
IPv6 headers, including version number mismatch, other format
errors, hop count exceeded, IPv6 options, etc.
too big errors
The number of input datagrams that could not be forwarded
because their size exceeded the link MTU of outgoing interface.
no routes
The number of input datagrams discarded because no route could
be found to transmit them to their destination.
address errors
The number of input datagrams discarded because the IPv6
address in their IPv6 header's destination field was not a valid
address to be received at this entity. This count includes invalid
addresses (e.g., ::0) and unsupported addresses (e.g., addresses
with unallocated prefixes). For entities which are not IPv6 routers
and therefore do not forward datagrams, this counter includes
datagrams discarded because the destination address was not a
local address.