Microsens MS453490M Management Guide - Manual (Page 557)

C HAPTER 22 | SNMP Commands
– 557 –
snmp-server
community
This command defines community access strings used to authorize
management access by clients using SNMP v1 or v2c. Use the no form to
remove the specified community string.
S YNTAX
snmp-server community string [ro | rw]
no snmp-server community string
string - Community string that acts like a password and permits
access to the SNMP protocol. (Maximum length: 32 characters, case
sensitive; Maximum number of strings: 5)
ro - Specifies read-only access. Authorized management stations
are only able to retrieve MIB objects.
rw - Specifies read/write access. Authorized management stations
are able to both retrieve and modify MIB objects.
D EFAULT S ETTING
◆ public - Read-only access. Authorized management stations are only
able to retrieve MIB objects.
◆ private - Read/write access. Authorized management stations are able
to both retrieve and modify MIB objects.
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#snmp-server community alpha rw
Console(config)#
snmp-server
contact
This command sets the system contact string. Use the no form to remove
the system contact information.
S YNTAX
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information.
(Maximum length: 255 characters)
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration