Microsens MS453490M Management Guide - Manual (Page 570)

C HAPTER 22 | SNMP Commands
– 570 –
show snmp view This command shows information on the SNMP views.
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show snmp view
View Name: mib-2
Subtree OID: 1.2.2.3.6.2.1
View Type: included
Storage Type: permanent
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: volatile
Row Status: active
Console#
nlm This command enables or disables the specified notification log.
S YNTAX
[no] nlm filter-name
filter-name - Notification log name. (Range: 1-32 characters)
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
◆ Notification logging is enabled by default, but will not start recording
information until a logging profile specified by the snmp-server notify-
filter command is enabled by the nlm command.
Table 57: show snmp view - display description
Field Description
View Name Name of an SNMP view.
Subtree OID A branch in the MIB tree.
View Type Indicates if the view is included or excluded.
Storage Type The storage type for this entry.
Row Status The row status of this entry.