Microsens MS453490M Management Guide - Manual (Page 530)

C HAPTER 21 | System Management Commands
Event Logging
– 530 –
logging facility This command sets the facility type for remote logging of syslog messages.
Use the no form to return the type to the default.
S YNTAX
logging facility type
no logging facility
type - A number that indicates the facility used by the syslog server
to dispatch log messages to an appropriate service. (Range: 16-23)
D EFAULT S ETTING
23
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
The command specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by
the switch. However, it may be used by the syslog server to sort messages
or to store messages in the corresponding database.
E XAMPLE
Console(config)#logging facility 19
Console(config)#
clear log Clears messages from the logging buffer PE
show log Displays log messages PE
show logging Displays the state of logging PE
Table 45: Event Logging Commands (Continued)
Command Function Mode