Microsens MS453490M Management Guide - Manual (Page 186)

C HAPTER 7 | Address Table Settings
Configuring MAC Address Learning
– 186 –
◆ Also note that MAC address learning cannot be disabled if any of the
following conditions exist:
■
802.1X Port Authentication has been globally enabled on the switch
(see "Configuring 802.1X Global Settings" on page 326 ).
■
Security Status (see "Configuring Port Security" on page 323 ) is
enabled on the same interface.
P ARAMETERS
These parameters are displayed:
◆ Interface – Displays a list of ports or trunks.
◆ Port – Port Identifier. (Range: 1-10)
◆ Trunk – Trunk Identifier. (Range: 1-5)
◆ Status – The status of MAC address learning. (Default: Enabled)
W EB I NTERFACE
To enable or disable MAC address learning:
1.
Click MAC Address, Learning Status.
2.
Set the learning status for any interface.
3.
Click Apply.
Figure 82: Configuring MAC Address Learning