Microsens MS453490M Management Guide User Manual
Page 457
C
HAPTER
18
| Multicast Filtering
Layer 2 IGMP (Snooping and Query)
– 457 –
Figure 277: Showing Interface Settings for IGMP Snooping
D
ISPLAYING
M
ULTICAST
G
ROUPS
D
ISCOVERED
BY
IGMP
S
NOOPING
Use the Multicast > IGMP Snooping > Forwarding Entry page to display the
forwarding entries learned through IGMP Snooping.
CLI R
EFERENCES
◆
"show ip igmp snooping group" on page 866
C
OMMAND
U
SAGE
To display information about multicast groups, IGMP Snooping must first
be enabled on the switch (see
P
ARAMETERS
These parameters are displayed:
◆
VLAN – An interface on the switch that is forwarding traffic to
downstream ports for the specified multicast group address.
◆
Group Address – IP multicast group address with subscribers directly
attached or downstream from the switch, or a static multicast group
assigned to this interface.
◆
Source Address – The address of one of the multicast servers
transmitting traffic to the specified group.
◆
Interface – A downstream port or trunk that is receiving traffic for the
specified multicast group. This field may include both dynamically and
statically configured multicast router ports.