Microsens MS453490M Management Guide - Manual (Page 752)

C HAPTER 31 | Automatic Traffic Control Commands
– 752 –
Storm-control: Multicast
Apply-timer(sec) : 300
release-timer(sec) : 900
Console#
show auto-traffic-
control interface
This command shows interface configuration settings and storm control
status for the specified port.
S YNTAX
show auto-traffic-control interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show auto-traffic-control interface ethernet 1/1
Eth 1/1 Information
------------------------------------------------------------------------
Storm Control: Broadcast Multicast
State: Disabled Disabled
Action: rate-control rate-control
Auto Release Control: Disabled Disabled
Alarm Fire Threshold(Kpps): 128 128
Alarm Clear Threshold(Kpps):128 128
Trap Storm Fire: Disabled Disabled
Trap Storm Clear: Disabled Disabled
Trap Traffic Apply: Disabled Disabled
Trap Traffic Release: Disabled Disabled
------------------------------------------------------------------------
Console#