Microsens MS453490M Management Guide - Manual (Page 334)

C HAPTER 14 | Security Measures
Configuring 802.1X Port Authentication
– 334 –
W EB I NTERFACE
To configure port authenticator settings for 802.1X:
1. Click Security, Port Authentication.
2. Select Configure Interface from the Step list.
3. Click Supplicant.
4. Modify the supplicant settings for each port as required.
5. Click Apply
Figure 190: Configuring Interface Settings for 802.1X Port Supplicant
D ISPLAYING 802.1X
S TATISTICS
Use the Security > Port Authentication (Configure Interface) page to
display statistics for dot1x protocol exchanges for any port.
CLI R EFERENCES
◆ "show dot1x" on page 630
P ARAMETERS
These parameters are displayed:
Table 21: 802.1X Statistics
Parameter Description
Authenticator
Rx EAPOL Start The number of EAPOL Start frames that have been received
by this Authenticator.
Rx EAPOL Logoff The number of EAPOL Logoff frames that have been received
by this Authenticator.
Rx EAPOL Invalid The number of EAPOL frames that have been received by this
Authenticator in which the frame type is not recognized.