Ip igmp snooping – Microsens MS453490M Management Guide User Manual
Page 850
C
HAPTER
37
| Multicast Filtering Commands
IGMP Snooping
– 850 –
ip igmp snooping
This command enables IGMP snooping globally on the switch or on a
selected VLAN interface. Use the no form to disable it.
S
YNTAX
[no] ip igmp snooping [vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4093)
Floods unregistered multicast traffic into the attached
VLAN
GC
Specifies how often the upstream interface should
transmit unsolicited IGMP reports (when proxy
reporting is enabled)
GC
Configures the IGMP version for snooping
GC
Discards received IGMP messages which use a version
different to that currently configured
GC
Suppresses general queries except for ports attached
to downstream multicast hosts
GC
Immediately deletes a member port of a multicast
service if a leave packet is received at that port and
immediate-leave is enabled for the parent VLAN
GC
Configures the number of IGMP proxy query messages
that are sent out before the system assumes there are
no local members
GC
Configures the last-member-query interval
GC
Sends multicast router solicitation messages
GC
Configures a static address for proxy IGMP query and
reporting
GC
Configures the interval between sending IGMP proxy
general queries
GC
Configures the maximum time the system waits for a
response to proxy general queries
GC
ip igmp snooping vlan
proxy-reporting
Enables IGMP Snooping with Proxy Reporting
GC
Adds an interface as a member of a multicast group
GC
ip igmp snooping
vlan version
Configures the IGMP version for snooping
GC
ip igmp snooping
vlan version-exclusive
Discards received IGMP messages which use a version
different to that currently configured
GC
Shows the IGMP snooping, proxy, and query
configuration
PE
Shows known multicast group, source, and host port
mapping
PE
Table 122: IGMP Snooping Commands (Continued)
Command
Function
Mode