Show bridge-ext, Show garp timer – Microsens MS453490M Management Guide User Manual
Page 785
C
HAPTER
34
| VLAN Commands
GVRP and Bridge Extension Commands
– 785 –
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
show bridge-ext
This command shows the configuration for bridge extension commands.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
See
"Displaying Bridge Extension Capabilities" on page 93
for a description
of the displayed items.
E
XAMPLE
Console#show bridge-ext
Maximum Supported VLAN Numbers : 4093
Maximum Supported VLAN ID : 4093
Extended Multicast Filtering Services : No
Static Entry Individual Port : Yes
VLAN Learning : IVL
Configurable PVID Tagging : Yes
Local VLAN Capable : No
Traffic Classes : Enabled
Global GVRP Status : Disabled
GMRP : Disabled
Console#
show garp timer
This command shows the GARP timers for the selected interface.
S
YNTAX
show garp timer [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
D
EFAULT
S
ETTING
Shows all GARP timers.
C
OMMAND
M
ODE
Normal Exec, Privileged Exec