Microsens MS453490M Management Guide - Manual (Page 594)

C HAPTER 24 | Authentication Commands
TACACS+ Client
– 594 –
E XAMPLE
Console(config)#tacacs-server key green
Console(config)#
tacacs-server port This command specifies the TACACS+ server network port. Use the no
form to restore the default.
S YNTAX
tacacs-server port port-number
no tacacs-server port
port-number - TACACS+ server TCP port used for authentication
messages. (Range: 1-65535)
D EFAULT S ETTING
49
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#tacacs-server port 181
Console(config)#
show tacacs-server This command displays the current settings for the TACACS+ server.
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show tacacs-server
Remote TACACS+ server configuration:
Global settings:
Communication key with TACACS+ server:
Server port number: 49
Server 1:
Server IP address: 10.11.12.13
Communication key with TACACS+ server:
Server port number: 49
Console#