Microsens MS453490M Management Guide - Manual (Page 907)

C HAPTER 39 | Domain Name Service Commands
– 907 –
clear host This command deletes dynamic entries from the DNS table.
S YNTAX
clear host {name | *}
name - Name of the host. (Range: 1-100 characters)
* - Removes all entries.
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
Use the the clear host command to clear dynamic entries, or the no ip
host command to clear static entries.
E XAMPLE
This example clears all static entries from the DNS table.
Console(config)#clear host *
Console(config)#
show dns This command displays the configuration of the DNS service.
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show dns
Domain Lookup Status:
DNS enabled
Default Domain Name:
sample.com
Domain Name List:
sample.com.jp
sample.com.uk
Name Server List:
192.168.1.55
10.1.0.55
Console#